Neurotrac Continence Unit
The NeuroTrac Continence unit is a dual channel muscle stim that has clincal programs loaded.
15 Built-in programmes (3 Customisable).
- Buy 10 for £107.94 £89.95 each and save 10%
- Free delivery when you spend over £75 exc. VAT (exclusions apply)*
- We accept Mastercard, VISA & AMEX
- Finance options available for orders over £1000 + VAT
The NeuroTrac Continence unit is a dual channel muscle stim that has clincal programs loaded.
15 Built in programmes
3 Customisable programmes
Programme :
P01 PAIN RELIEF, P02 URGE, P03 STRESS 1, P04 STRESS 2, P05 FREQ/URGE 1, P06 FREQ/URGE 2, P07 LACK OF SENSITIVITY [25 MIN], P08 PELVIC FLOOR WORK OUT [60 MIN], P09 BUILDING UP ENDURANCE CUSTOMISED :
PC1,PC2, PC3 are the customable slots for your own programs.
LCD displays Intensity, rate, pulse width, time and programme Mode
Time setting up to 90 minutes constant current (extends battery life)
Work / rest periods from 2 - 99 seconds
Range: rate: 2 Hz - 100 Hz, pulse width: 50 µS to 450 µS
Alternating and synchronous between channel A and B
Lock mode function for recording time in use and locking the units parameters
Automatic switch off after 4 minutes if unit is not in use
The Neurotrac Continence unit is supplied with the following:
9V Battery
2 x dual conductor lead wires
Operating manual & quick start guide
Carry pouch
Neurotrac Continence Unit comes with 2 year warranty. (Terms & conditions apply).
| Technical | Dual channel: individually isolated circuits. Amplitude: 0 - 90 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA. Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts Waveform: Asymmetrical, rectangular bi-phasic with zero DC current. Selectable pulse width: 50 μS - 450 μS [2% accuracy]. Pulse Rate selection: in the continuous mode 2 Hz - 100 Hz [2% accuracy]. Time duration of the treatment selectable: 1 minute to 90 minutes. Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second. Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero. Ramp up time 0.3 - 9.9 seconds. If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on. |
|---|---|
| Product Dimensions | 12cm x 6.5cm x 2.5cm |
| Net Weight | 0.1Kg |
| Gross Weight | 0.5Kg |
